环境：
PostgreSQL 9.2.4
主机:192.25.10.76
从机:192.25.10.71
做postgresql的流复制主从时，会遇到调整max_wal_sengers这个参数，官方文档对这个参数做了一个简要的说明(9.2.4比早先版本多了几句话并做了一些微调)，但没有实际的例子。
1.参数说明：
Specifies the maximum number of concurrent connections from standby servers or streaming base backup clients (i.e., the maximum number of simultaneously running WAL sender processes). The default is zero, meaning replication is disabled. WAL sender processes count towards the total number of connections, so the parameter cannot be set higher than max_connections. This parameter can only be set at server start. wal_level must be set to archive or hot_standby to allow connections from standby servers.
也就是说，这个参数是在主机上设置的，是从机连接到主机的并发连接数之总和，所以这个参数是个正整型。默认值是0，也即默认没有流复制功能。该并发连接数从进程上看，就是各个wal sender进程数之和，可以通过ps -ef|grep senders来查看，所以该值不能超过系统的最大连接数(max_connections，该BUG在9.1.5被修复)，可以允许超过实际的流复制用户数。该参数更改需要重启DB，比如我只配了一个从机:
[postgres@ndb2 database]$ ps -ef|grep sender postgres 21257 21247 0 20:57 "htmlcode">2013-08-12 20:53:42.132 CST,,,8859,,5208dad6.229b,1,,2013-08-12 20:53:42 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"" 2013-08-12 20:53:47.137 CST,,,8861,,5208dadb.229d,1,,2013-08-12 20:53:47 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"" 2013-08-12 20:53:52.142 CST,,,8862,,5208dae0.229e,1,,2013-08-12 20:53:52 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"" 2013-08-12 20:53:57.148 CST,,,8864,,5208dae5.22a0,1,,2013-08-12 20:53:57 CST,,0,FATAL,XX000,"could not connect to the primary server: FATAL: number of requested standby connections exceeds max_wal_senders (currently 0) ",,,,,,,,,"主机上显示的日志异常:
receiver" 2013-08-12 20:43:26.937 CST,,,21064,"",5208d86e.5248,1,"",2013-08-12 20:43:26 CST,,0,LOG,00000,"connection received: host=192.25.10.71 port=46085",,,,,,,,,"" 2013-08-12 20:43:26.938 CST,"repuser","",21064,"192.25.10.71:46085",5208d86e.5248,2,"authentication",2013-08-12 20:43:26 CST,2/1195,0,LOG,00000,"replication connection authorized: user=repuser",,,,,,,,,"" 2013-08-12 20:43:26.938 CST,"repuser","",21064,"192.25.10.71:46085",5208d86e.5248,3,"startup",2013-08-12 20:43:26 CST,2/0,0,FATAL,53300,"number of requested standby connections exceeds max_wal_senders (currently 0)",,,,,,,,,"walreceiver" 2013-08-12 20:43:26.939 CST,"repuser","",21064,"192.25.10.71:46085",5208d86e.5248,4,"startup",2013-08-12 20:43:26 CST,,0,LOG,00000,"disconnection: session time: 0:00:00.002 user=repuser database= host=192.25.10.71 port=46085",,,,,,,,,"wa lreceiver" 2013-08-12 20:43:41.513 CST,,,21066,"",5208d87d.524a,1,"",2013-08-12 20:43:41 CST,,0,LOG,00000,"connection received: host=192.25.10.71 port=46086",,,,,,,,,"" 2013-08-12 20:43:41.514 CST,"repuser","",21066,"192.25.10.71:46086",5208d87d.524a,2,"authentication",2013-08-12 20:43:41 CST,2/1198,0,LOG,00000,"replication connection authorized: user=repuser",,,,,,,,,"" 2013-08-12 20:43:41.514 CST,"repuser","",21066,"192.25.10.71:46086",5208d87d.524a,3,"startup",2013-08-12 20:43:41 CST,2/0,0,FATAL,53300,"number of requested standby connections exceeds max_wal_senders (currently 0)",,,,,,,,,"walreceiver" 2013-08-12 20:43:41.515 CST,"repuser","",21066,"192.25.10.71:46086",5208d87d.524a,4,"startup",2013-08-12 20:43:41 CST,,0,LOG,00000,"disconnection: session time: 0:00:00.002 user=repuser database= host=192.25.10.71 port=46086",,,,,,,,,"wa lreceiver" ...遇到如此问题，则需要检查postgresql.conf文件的max _wal_senders参数了。
3.参数生效
文档上说明需要重启DB使之生效，如果动态使之生效会报错如下：
[postgres@proxy1 ]$ psql psql (9.2.4) Type "help" for help. postgres=# show max_wal_senders ; max_wal_senders ----------------- 0 (1 row) postgres=# set max_wal_senders=1; ERROR: parameter "max_wal_senders" cannot be changed without restarting the server postgres=#补充： postgresql基于流复制 (streaming replication)的warm-standby
实例一枚：
Primary:
l 归档设置：
Wal_level=archive Archive_mode=on archive_command = 'cp -i %p /data/pgsql/archived_wal/%f'l 流复制相关设置：
max_wal_senders = '10' #启动复制进程数量限制，必须大于0 max_replication_slots = '10' #为使用replication slot，必须大于0；replication slot作用是保证wal没有同步到standby之前不能从pg_xlog移走； wal_keep_segments = '50' #指定pg_xlog中最少保留的wal数量 select pg_create_physical_replication_slot(‘gp1_a_slot'); #创建replication slot select * from pg_replication_slots; #查询创建的replication slotl 编辑pg_hba.conf
# Allow replication connections from localhost, by a user with the replication privilege. #host replication postgres 127.0.0.1/32 trust #host replication postgres ::1/128 trust local replication postgres trust host replication postgres 192.168.12.0/24 trustl 联机备份过程（基础备份）
#touch /var/lib/pgsql/backup_in_progress $psql –c "select pg_start_backup('hot_backup');" $tar -cf /var/lib/pgsql/backup.tar /var/lib/pgsql/data/ $psql -c "select pg_stop_backup();" #rm /var/lib/pgsql/backup_in_progress tar -rf /var/lib/pgsql/backup.tar /var/lib/pgsql/archive/ #打包归档实例：
psql -c "select pg_start_backup('pgbk10');" tar -zcf pgbk10.tgz data/ psql -c "select pg_stop_backup();"Standby：
l 编辑recovery.conf
standby_mode = 'on' primary_conninfo = 'host=192.168.12.38 port=5666 user=postgres' primary_slot_name='gp1_a_slot' #restore_command = 'cp /data/pgsql/archived_wal/%f %p' #archive_cleanup_command = 'pg_archivecleanup /data/pgsql/archived_wal %r'l 将primary上的基础备份传输到standby上
$scp primary: /var/lib/pgsql/backup.tar .解压备份到standby上的$PGDATA
l 启动standby
$pg_ctl start –D $PGDATA启动standby后，postgres开始从primary上接收wal日志进行恢复，并且一直保持恢复状态，psql不能登录；
以上为个人经验，希望能给大家一个参考，也希望大家多多支持。如有错误或未考虑完全的地方，望不吝赐教。
免责声明：本站文章均来自网站采集或用户投稿，网站不提供任何软件下载或自行开发的软件！ 如有用户或公司发现本站内容信息存在侵权行为，请邮件告知！ 858582#qq.com
《魔兽世界》大逃杀！60人新游玩模式《强袭风暴》3月21日上线
暴雪近日发布了《魔兽世界》10.2.6 更新内容，新游玩模式《强袭风暴》即将于3月21 日在亚服上线，届时玩家将前往阿拉希高地展开一场 60 人大逃杀对战。
艾泽拉斯的冒险者已经征服了艾泽拉斯的大地及遥远的彼岸。他们在对抗世界上最致命的敌人时展现出过人的手腕，并且成功阻止终结宇宙等级的威胁。当他们在为即将于《魔兽世界》资料片《地心之战》中来袭的萨拉塔斯势力做战斗准备时，他们还需要在熟悉的阿拉希高地面对一个全新的敌人──那就是彼此。在《巨龙崛起》10.2.6 更新的《强袭风暴》中，玩家将会进入一个全新的海盗主题大逃杀式限时活动，其中包含极高的风险和史诗级的奖励。
《强袭风暴》不是普通的战场，作为一个独立于主游戏之外的活动，玩家可以用大逃杀的风格来体验《魔兽世界》，不分职业、不分装备（除了你在赛局中捡到的），光是技巧和战略的强弱之分就能决定出谁才是能坚持到最后的赢家。本次活动将会开放单人和双人模式，玩家在加入海盗主题的预赛大厅区域前，可以从强袭风暴角色画面新增好友。游玩游戏将可以累计名望轨迹，《巨龙崛起》和《魔兽世界：巫妖王之怒 经典版》的玩家都可以获得奖励。